- 專業(yè)翻譯公司
-
機械安裝翻譯-中譯英
Unitrans世聯(lián)
機械翻譯當中，有很多安裝說明是需要翻譯的，以下就是世聯(lián)北京翻譯公司資深譯員對加熱器機械安裝說明翻譯。1、加熱器應水平安裝，并且要安裝牢固。并注意適當?shù)谋Ｗo。電器部件應朝向加熱器艙體外，以便利于加熱器的維修，保養(yǎng)。同時，要保證加熱器的助燃空氣進氣充分，以便加熱器能正常工作。
加熱器的安裝
1611T5043E0-3EK border=0>
Install
The heater should be securely installed horizontally. Protection should be available wherever it is necessary. Electric components should face outward of the heater housing to facilitate repair and maintenance. In addition, sufficient combustion air should be supplied to the heater; otherwise, the heater may not operate normally.
The oil drop pipe and the exhaust pipe of the heater should extrude outside of the installation housing of the heater. Do not block the exhaust path. Generally no extension should be used on the exhaust pipe; otherwise, the heater may suffer from insufficient combustion due to the increased exhausting resistance.
The heater may source its fuel from the main fuel tank on the vehicle, or, alternatively from the fuel tank included in the configuration. For main tank supply, the fuel intake circuit should be independent from the fuel pipes for other equipments on the vehicle. The fuel pipes should be φ6×1 copper pipes or CHINAUST pipes equipped with standard M12×1.25 taper joints. The joints should be securely fixed with air tightness. The fuel surface in the tank should be no lower than the heater center by 400mm or more. The oil-intake joint of the heater oil filter solenoid should be within 8m away from the tank (i.e., the fuel pipe length). Due to the long oil circuit, it may take a long time for the heater to start for the first time. You should wait 3 or 4 minutes. If the heater is not started after that, please shut down the heater and restart it.
